ATF 5 in 1 EMMC Cable is cable for ATF (Advance Turbo Flasher) has 5 different functions for working via jtag using ATF Software.

Functions:

• 1. Memory Card Password Reader
  - Connect ATF 5 in1 EMMC Cable with ATF & Insert Password Protected Memory card into slot & open ATF software and you are good to go rest operation from ATF box
  
• 2. JTAG Jigs from Molex
  - You can use GPG 33 in 1 Easy Jtag Jigs as well as Molex Jtag Jigs on it too. Just connect Flex of Easy JTAG Jig and Connect ATF 5 in 1 EMMC Cable with ATF and open ATF software and you are done.
  
• 3. JTAG Jigs from Molex
  - You can Directly Solder wires to phones Jtag Test points. This is made much easier because every point is written on ATF 5 in 1 EMMC Cable.
  
• 4. JTAG Jigs from Molex
  - Simple like one two three... Solder eMMC ic on Adaptor and connect it to ATF 5 in 1 EMMC Cable and do read & write from ATF Software.
  
• 5. EMMC Chip Direct Read & Write By ISP
  - You can Directly Solder wires to phones Emmc ISP Test points. This is made much easier because every point is written on ATF 5 in 1 EMMC Cable.
  

Compatible With:

• ATF Nitro
  
• ATF Lightning
  
• Advance Turbo Flasher