Price: 16.86 USD
|
ATF 5 in 1 EMMC Cable is cable for ATF (Advance Turbo Flasher) has 5 different functions for working via jtag using ATF Software.
Functions:
- 1. Memory Card Password Reader
- Connect ATF 5 in1 EMMC Cable with ATF & Insert Password Protected Memory card into slot & open ATF software and you are good to go rest operation from ATF box
- 2. JTAG Jigs from Molex
- You can use GPG 33 in 1 Easy Jtag Jigs as well as Molex Jtag Jigs on it too. Just connect Flex of Easy JTAG Jig and Connect ATF 5 in 1 EMMC Cable with ATF and open ATF software and you are done.
- 3. JTAG Jigs from Molex
- You can Directly Solder wires to phones Jtag Test points. This is made much easier because every point is written on ATF 5 in 1 EMMC Cable.
- 4. JTAG Jigs from Molex
- Simple like one two three... Solder eMMC ic on Adaptor and connect it to ATF 5 in 1 EMMC Cable and do read & write from ATF Software.
- 5. EMMC Chip Direct Read & Write By ISP
- You can Directly Solder wires to phones Emmc ISP Test points. This is made much easier because every point is written on ATF 5 in 1 EMMC Cable.
Compatible With:
- ATF Nitro
- ATF Lightning
- Advance Turbo Flasher
|